AIT designs, engineers, manufactures and tests nuclear/non-nuclear
pressure vessels, heat
exchangers, heavy walled vessels, tanks, filters, dampeners, orifices, venturis, coolers and provides nuclear upgraded items.
We also provide project management, welding services, & nuclear materials.
Our customers include....
|
Amer Industrial Technologies
100 Amer Road, Building 200
Wilmington, DE USA 19809
Phone 302.765.3900
Fax 302.765.3544 info@amerindustrial.com
ASME Accredited and National Board Certified
VIEW AIT FULL CORPORATE LITERATURE (MS Word)
AIT can install and erect your equipment anywhere in the world
Welding underway on ASME Section III Class 2 Mitered Pipes for Hanford
Nuclear Facility in Richland, WA USA
browse our products...
Safety First! AIT workers weld and grind with safety in mind!
|
Design and
Manufacture |
|
Design and manufacture are controlled and validated in accordance
with our ASME Quality Assurance Programs.
All aspects of design, construction, welding, inspection and testing
are overseen and inspected by trained and experienced individuals
in accordance with the construction code requirements. Construction
is controlled using Quality Control Route Sheets listing each operation
in sequence, including welding and procedures. Welds are completed
in accordance with ASME Section IX and are inspected per ASME Code
requirements. Our Quality Control Program
includes provisions for customer audits and inspections as required.
|
Engineering, Design & Analysis Capabilities
Fabrication Capacities & Equipment
Welding Processes, Procedures, Materials, Testing, & Certification
|
|
Engineering,
Design & Analysis Capabilities |
|
Engineering Studies & Assessments
• Cost/Benefit Analysis
• Feasibility Studies
• Conceptual Design Reports
|
|
|
Mechanical Engineering Capabilities
• ASME (Section III & VIII) Engineering
• Reverse
Engineering
• Welding Procedure
Development
• Thermal Analysis
• Heat Exchanger Upgrades, Design, & Analysis
• Chilled Water System Design & Analysis
• Corrosion/ Erosion Analysis
• Cooling Water System Design & Analysis
• Seismic & Fuel Storage Analysis
• Orifice & Venturi Design/Engineering
• Cavitation Venturi Engineering
• Feedwater Heater Engineering
|
 |
Computer Program Expertise
• Project Management
° Primavera, Sure Trak Project
Manager 2.0
° Microsoft Project
• Drafting
° AUTOCAD
• Design
° APV-Applied Pressure Vessel
Design
° Algor - Finite Element Analysis
|
 |
|
Project Management Expertise
• International Projects- outsourcing
of labor, international agency programs
• Globalized Sourcing of Products and Services
• Supply Chain
Management, Logistics, and Procurement
• Seamless
Integration of Operations, Finance, and Logistics
• Gantt Charting,
Project Tracking, and Baseline Data Organization
• Team of
Experienced and Qualified Professionals
• Pre-Qualification
and Pre-Approved Vendors Qualifications
• Technology
Transfer and Initialization
• ASME Consultation
• Custom Equipment Development
• Procedure Writing & Development
• Quality Assurance & Quality Control
• International Joint Venture Projects
|
|
|
Fabrication
Capacities & Equipment |
 Bertsch Heavy Roll, rolls steel plate up to 3" Thick
|
Manufacturing Space
110,000 Sq. Ft.
Cranes
(2) 20 Ton Overhead Cranes
(4) 7.5 Ton Overhead Cranes
(4) 10 Ton Overhead Cranes
(1) 2 Ton Jib Crane
(2) 2 Man Cherry Pickers
Special Welding Equipment
Air Arc Welders
Arc Welders
Mig Welders (GMAW)
Tig Welders (GTAW)
Pipe Welders
Portable Welding Equipment
Tube to Tubesheet Automatic Welder
Orbital Welding Machines
Welding Manipulators
(1) Lincoln Welding Manipulator 24" x 24"
(1) Ransome Welding Manipulator 12" x 12"
(1) Aronson Welding Manipulator 8" x 8"
(1) Special Design Custom Manipulator 8' x 24'
Finishing Equipment
Sandblasting, permanent and on-site,
qualified to your specifications
Painting, air spray guns
|
Employees
30-60 Qualified Employees
Special Plate Bending Roll Equipment
(1) Heavy 3" x 10' Capacity
(1) Bertsch 1" x 12' Capacity
(1) Bertsch 1.00" x 12' Capacity
(1) 3/16" x 4" Capacity
(1) Bertsch 1.25" x 10' Capacity
Press Brake
(1) 16' 300 Ton Press Brake
Special Cutting Equipment
3" Plasma Cutting Systems
10" Flame Torch Cutting System
8" Cut-Off Saws
3/8" x 12' Shearing Machine
Punch Machine
Buffalo Iron Worker (Shears, Punches)
Turning Rolls
(12) 150 Ton Turning Rolls
(24) 60 Ton Turning Rolls
Positioners
90 Ton Drop Cap Positioner
Many, many smaller
positioners |
|
|
Welding
Processes, Procedures, Materials & Testing
|
| All of our welding procedures are qualified in accordance with ASME Section IX and meet the
requirements of AWS D1.1 for the following materials and processes:
|
Materials
• Carbon Steel
• Stainless Steel
• Nickel Alloys
• Zirconium
• Titanium
• Monel, Inconel, and Hasteloy
Processes
• SAW (Submerged Arc Welding)
• GTAW (Gas Tungsten Arc
Welding)
• SMAW (Shielded Metal Arc
Welding)
• FCAW (Flux Core Arc
Welding)
• GMAW (Gas Metal Arc Welding)
• ESW (Electro
Slag Welding)
• EBW
(Electron Beam Welding)
• EGW (Electrogas
Welding)
• Stick
• Automatic Tube to Tube Sheet Welding
• Automatic TIG Welding
• Automatic MIG Welding |
Non-Destructive Examination
• Hydrostatic Testing
• Radiographic Testing
• Magnetic Particle Testing
• Pneumatic Testing
• Helium Leak Testing
• Coordinate Mapping & Measuring (CMM)
• Ultrasonic Testing
• Eddy Current Testing
• Liquid Penetrant
Testing
Processing
• Plasma Arc Cutting
• Torch Cutting
• Press Brake
• Rolling, Stamping, Tacking
• Welding & Assembly
• CNC Machining
Quality Certifications & Accreditations |
|
|
|
